Raspberry Pi unboxing and an example to flash LED

Posted on by

Raspberry Pi Model B Revision 2.0

    Broadcom BCM2835 700MHz ARM1176JZFS processor with FPU and Videocore 4 GPU

    512MB RAM

    Additional specs: 10/100 BaseT Ethernet, HDMI, (2) USB 2.0, RCA video, SD card socket, Powered from microUSB socket, 3.5 mm audio out jack, boots from SD card

DSC_0030DSC_0031DSC_0032

 

Audio, RCA Video, GPIO

DSC_0023

Ethernet, USB 2.0 x2

DSC_0024

HDMI

DSC_0025

SD Car Socket, Power (Micro USB)

DSC_0027    DSC_0035 DSC_0036 DSC_0042 DSC_0046

 

Sample code for flashing LED 

import RPi.GPIO as GPIO
import time

GPIO.setmode(GPIO.BOARD)
GPIO.setup(7, GPIO.OUT)
GPIO.output(pin,GPIO.HIGH)
time.sleep(1)
GPIO.output(pin,GPIO.LOW)
time.sleep(1)

 

Leave a Reply